Industry News

Operation steps and methods for building an anti-bird net

Update:21-07-2018
Summary:

1. The stand of the bird-proof net should be set up acc […]

1. The stand of the bird-proof net should be set up according to the height of the fruit tree. The column must exceed the height of the fruit tree by more than one meter five. The steel pipe is erected every 20 meters in the horizontal direction every ten meters in the horizontal direction, and the bottom is to be irrigated with cement. The depth of the irrigated cement is about 70 cm.

2. The anchor is fixed on the ground, which can ensure that the column is firm and stable. The anti-bird net frame should be connected with the horizontal longitudinal wires by wires. After fixing the two ends of the wire, the wire should be tightened with a tightener and then fixed. The next step is to net the net.

3. According to the pace of the thread through the line. Place the net on the shelf and secure the two sides of the mesh. First come through the net network line of Skynet, open the anti-bird net, find the side of the width, and wear the mesh with the mesh line. Leave a piece of rope at each end and tie it to the side of the grid at both ends. In this way, the width side can be accurately and accurately opened during the process of the device. The anti-bird net blue or black end is a reinforcing side, and the reinforcing side acts as a reinforcement to prevent the net from tearing.

www.chinanetlon.com