The construction method and construction steps of the b […]
The construction method and construction steps of the bird-proof net have a great influence on the degree of construction*. If the construction method is not correct, then the anti-bird effect will be poor for the end, so how to build a bird-proof net, let's let Mori under the network tells you.
1. The stand of the bird-proof net should be set up according to the height of the fruit tree. The column must exceed the height of the fruit tree by more than one meter five. The steel pipe is erected every 20 meters in the horizontal direction every ten meters in the horizontal direction, and the bottom is to be irrigated with cement. The depth of the irrigated cement is about 70 cm.
2. The anchor is fixed on the ground, which can ensure that the column is firm and stable. The bird-proof net frame is to be connected with a horizontal wire in a longitudinal direction by a wire. After fixing the two ends of the wire, the wire is tightened with a wire tightener, and then fixed, and the next step is to net the wire.
3, according to the pace of the thread through the line. Place the net on the shelf and secure the two sides of the mesh. First, wear the net line of Skynet, open the bird-proof net, find the side of the width, and wear the mesh with the mesh line. A piece of rope is left at each end and attached to the edge of the grid at both ends. In this way, the width side can be swung in the process of the device. The anti-bird net blue or black end is a reinforcing side, and the reinforcing side acts as a reinforcement to prevent the net from tearing.